A DIY Guide to Using Car Scratch Remover Spray

Published On 19/7/2024, 1:48:58 pm Author Nitesh Yadav

Indian streets can be tough on our cars. With unpredictable scooterists and careless parking lot neighbors, minor scratches are common. But don't rush to the body shop just yet. There's a simple solution: car scratch remover spray!

Car scratch remover spray is a fantastic option for tackling those shallow scratches that haven't breached the paint layer. It's a budget-friendly and convenient way to restore your car's shine without professional intervention. These sprays work by gently buffing out the scratches, making them less noticeable and often removing them entirely. With just a few simple steps, you can apply the spray, buff the affected area, and watch the scratches fade away. It’s an excellent way to keep your car looking its best without the cost and hassle of a trip to the body shop.

Using a scratch remover spray can save you both money and time. A typical trip to the body shop for scratch repairs can cost anywhere from ₹1,000 to ₹5,000, depending on the severity and location of the damage. In contrast, a good quality scratch remover spray costs between ₹200 and ₹500. Not only does this save you a significant amount of money, but it also saves you the time and hassle of scheduling and waiting for professional repairs.

While car scratch remover sprays are incredibly useful, you need to be cautious about matching the shade of your car's paint. Different manufacturers and models often have specific shades of the same color. For instance, if your car is white, you might need a shade like "Polar White" or "Pearl White." Similarly, for a red car, you might need "Crimson Red" or "Cherry Red."

To ensure a perfect match, start by identifying the exact name of your car’s paint color. You can usually find this information on a sticker or plate located inside the driver’s side door jamb, under the hood, or in the trunk. This sticker will typically include a paint code, which is a combination of letters and numbers that correspond to your car's exact color. how to identiy your car color code Once you have the paint code, you can look for a scratch remover spray that matches your car’s color. Many automotive supply stores and online retailers offer a wide range of color-matched products. Be sure to double-check the color name and code before purchasing to avoid any discrepancies.

Applying car scratch remover spray is a straightforward process, but doing it correctly will give you the best results. Here’s a step-by-step guide to help you: car spray paint.jpg

Clean the Area: Start by thoroughly washing the area around the scratch with soap and water. This removes any dirt or debris that could cause further damage during the repair process. Dry the area completely with a clean microfiber cloth.

Prepare the Spray: Shake the scratch remover spray canister well to ensure that the product is properly mixed. Read the instructions on the can for any specific preparation steps.

Apply the Spray: Hold the can about 6 to 8 inches away from the scratched area. Apply the spray in light, even coats, covering the scratch and a small surrounding area. Be careful not to over-apply, as this can create uneven results.

Buff the Area: After applying the spray, let it sit for a few minutes as per the product’s instructions. Once it’s dry to the touch, use a clean microfiber cloth to gently buff the area. Use circular motions and light pressure to blend the repair with the rest of the car’s paint.

Inspect and Repeat: Check the repaired area to ensure the scratch is sufficiently covered. If needed, apply another coat of the spray and repeat the buffing process. Some scratches might require multiple applications to achieve a perfect match.

Finish Up: Once you’re satisfied with the results, give the area a final wipe with a clean cloth to remove any residue. If desired, you can apply a coat of car wax to protect the repaired area and enhance the overall shine of your car.